Language
- 中文
- English

What should I do if the plastic buckle of the car is loose

Treatment method for the looseness of automobile plastic buckle:

1. The front bumper is clipped on the bumper bracket at the lower front end of the leaf plate, and the bumper bracket is a separate material;

2. If the front bar bracket is damaged, replace it decisively. The support 4S of Qida is very cheap. So you need to see what's wrong;

3. Another situation is that if the front bar is broken at several places at the position where the front bar is connected to the front bar bracket, it is recommended to replace the front bar. Even after plastic welding, the front bar will still break under a point force.

The interior trim panel is mostly loose due to loose screws or damaged buckles. You can remove the interior trim panel to see what is causing it, and deal with it in a targeted way. Most of the problems are caused by damaged buckles. Replace the buckles. Plastic bumper is composed of outer plate, buffer material and beam. The outer plate and buffer material are made of plastic, and the cross beam is punched into a U-shaped groove by a cold rolled sheet with a thickness of about 1.5mm; The outer plate and buffer material are attached to the cross beam, which is connected with the longitudinal beam of the frame by screws and can be removed at any time. The plastics used in this kind of plastic bumper are generally made of polyester and polypropylene by injection molding.

No matter what model it is, if the plastic plate of your center console is loose, it is very simple. You can ask him to fill the plastic plate tightly, so that it is not loose. In this way, it is generally impossible to make abnormal noise with the driving process.

last

Design standard of automobile connector

PPS automotive lampholder material

Recommended News